Roller Suspension Cement Pipe Making Machine With PLC Digital
Roller Suspension Concrete Pipe Making Machine for reinforced
concrete and prestressed concrete pipe production. Roller
Suspension Concrete Pipe Making Machine is economical, practical,
and easy to operate. More than 80% Chinese pipe making factories
use this type concrete pipe making machine. The machine can produce
pipes length up to 4 meters, and diameter from 200mm to 2400mm,
flat; socket and rabbet joints are available. Hanging roller cement
pipe machine is mainly used in municipal engineering, urban and
rural construction, drainage and utility large bridges.
(1) Short production Cycle: because of the good effect of the
roller to compact the concrete, every pipe just need 3-5 minutes
with high speed roller rotation.
(2) This Pipe machine uses the dry cast material, there will no
waste cement mud, then it won’t pollute the environment.
(3) During the production, the noise is low, it is about 80-90 DB
(4) The Concrete Pipes are with high pressure load and with high
This machine uses the Roller to support the pipe mould, and produce
the roller force to concrete in the mould. When the roller rotate
at a high speed, the concrete in the mould will spread in the inner
wall of the pipe mould and form a cement pipe with the centrifugal
force, and when the mould with the inner concrete pass on the
roller, the concrete between the mould and the roller will be
compacted solid to form a pipe.
|XG 200-600||XG 800-1200||XG 1000-1500||XG 4M|
|Power of Motor||15KW||45KW||90KW||110KW|
|Labor demand without feeding machine||4-5||4-5||4-5||4-5|
|Labor demand with feeding machine||3-4||3-4||3-4||3-4|
|Joint||Plain,socket and spigot,male and female||Plain,socket and spigot,male and female||Plain,socket and spigot, tongue and groove||Plain,socket and spigot,tongue and groove|
Working process :
(1): irst workers prepare the steel cage ,this cage can be made by
manual ,also can be made by automatic machinery ,this machine could
weld cage by automatic way.
(2): one worker clear the mould ,and brush de-mould oil
(3): use 5-10Ton crane to lift steel cage into mould, then use
screw nut to fix the mould .
(4): lift the mould in to overhang rolling machine ,lock the
machine and start running
(5): JS500 or JS750 machine mix the cement ,sand ,stone material
,then feed to the mould by automatic material feeding belt conveyer
system . mould will be under the high speed running ,the material
will be press into mould through main machine main shaft.
(6): after some minutes ,when material fill the mould ,then stop
and open the machine ,use 5-10Ton crane to lift the mould with pipe
to empty yard place.
(7): after 3 hours ,we could open the mould , then we have 5-7 days
water curing .
Accurate mould dimesion